About FuelTurbo
 |
The FuelTurbo is a four stage recycling diesel
fuel and tank polishing system with each stage working independently
of each other stage process. The non marking suction clear hose
and return green hose are inserted into the diesel tank to facilitate
the recycle process of the fuel. No pipes or hoses need to be removed
or disturbed on the engine or equipment. The hoses are equipped
with cam lock quick release couplings for easy fitting and removal,
hose plugs are provided to stop diesel spillage when the hoses are
disconnected from the unit. The FuelTurbo unit is somewhat like
a dialysis machine for contaminated diesel fuel. The unit is easily
maneuvered by one person due to its balanced alloy chassis and pneumatic
tyres.
|
Stage 1
When
the pump is turned on fuel will be drawn from the tank through the suction
hose and into the first stage FuelTurbo cyclone separator unit. Due to
the specially designed diversion plates within the unit any water and
large contamination will be separated from the fuel, this contamination
will settle in the lower section of the unit. Draining of this contamination
is periodically done by opening a ball valve at the bottom of the unit.
Stage 2
In our clear FuelTurbo strainer unit all solid particles above 800 microns
in size are filtered, additional water gets trapped in this unit which
is easily drained by opening a ball valve on the unit. The strainer unit
features a quick open cover for easy basket removal and cleaning.
Stage 3
When fuel flows through the FuelTurbo magnetic conditioner unit larger
clusters of algae, bacteria and fuel molecules are separated while passing
through the unit. The conditioner unit uses not your average fuel conditioner
magnets, we use the strongest magnets available which are called neodymium
rare earth magnets.
Stage 4
The final stage of the diesel polishing is the FuelTurbo filtration unit,
this high performance spin on filter unit removes all fine contamination
particles down to 10 microns in size. A filter restriction gauge on the
unit will advise the FuelTurbo technician when the filter requires replacement.
|
Specifications
|
|||
| Pump rating | 3000 Litres per hour | Power | 220 -240 AC - 50 hertz |
| Unit weight | 62 Kgs | Height | 1.2 Metre |
| Width | 0.6 Metre | Suction hose | 7.0 Metre clear, UL, non marking, 25 MM ID |
| Return hose | 7.0 Metre green, UL, non marking, 25 MM ID | Ball valves | High quality stainless and brass |
| Hose coupling | Quick release cam and groove | Filtration unit | 10 Micron spin on high flow |
| Strainer | 800 Micron element, clear, quick open | Conditioner | Neodymium super power magnet |
| Separator | Powder coated, cyclone centrifuge | Chassis | High strength alloy, pneumatic tyres |
| Fittings | Stainless and brass | Fuel type | Diesel, biodiesel only |